a) DRCU - Dynamic Reactive Compensation Unit: DRCU can measure all 3-Phase Electrical parameters and calculate the required capacitor value for Power Factor improvement. single and Two Steps for individual machine/Pump monitoring and 3 to 8 steps for the overall industry or Electrical utility or Commercial buildings. It also has alarm/trip controls. Time of Day is enabled. 6 Capacitor and 2 MD control is enabled.

b) DelTex- Textile Monitoring System: Deltex can measure individual machine 3-Phase Electrical parameters, and Physical parameters like Front Roller Speed, Spindle Speed, Temperature, and Humidity can be measured. Power factor improvement by compensating the reactive power. It also has alarm/trip controls.

c)DT-MMCM - Distribution Transformer Measuring, Monitoring & Controlling Module: DT-MMCM can measure all 3-Phase Electrical parameters and Physical parameters like Ambient Temperature, Humidity, Temperature, Oil Level are monitored. For the load required capacitors will be calculated and dynamically capacitors are going inside to improve the power factor. It also has alarm/trip controls.

d) MD Controller- Maximum Demand Controller: MD Controller can measure all 3-Phase Electrical parameters and multiple relays are used for Maximum Demand Control when the system load is exceeding 90% of maximum load. It will also cut-off the Non-critical loads based on customer inputs and cut-off the overall power supply when Non-critical load cut-off is insufficient through alarm/trip controls. Time of Day is enabled.

MFISM - Multi Features IoT Smart Energy Meter

от Delving Research and Development Pvt Ltd